Current Location:Production technology of automotive wiring harness
Click:3562Time:2015-12-04 14:07:49
Wire harness technology
After the online beam 2D product drawings, to arrange the production process of wire harness, the process is to serve the production of the two are inseparable, so the two combine together analysis.
Line process
Skinning is the first station of wire harness production, the accuracy of the skinning process is directly related to the production schedule, once appear mistake especially line size is too short, cause rework of all stations, affect the production efficiency and time consuming. So in the preparation process line is sure to reasonably determine the wire line size according to the requirements of the drawings, stripping head size. Production line operating instructions, production process tracking card.
Pressing process
Involute after the second production station, according to the requirements of the drawings of the terminal types to determine the pressure welding parameters, making crimping operation instructions, for special requirements in the process documents specify and train operators. Such as some conductors need to first pass through the sheath to crimping, it requires first preloaded with wire and then from preloaded position return recompression connected, and punctured crimping used special wire beam technology
After the online beam 2D product drawings, to arrange the production process of wire harness, the process is to serve the production of the two are inseparable, so the two combine together analysis.
Line process
Skinning is the first station of wire harness production, the accuracy of the skinning process is directly related to the production schedule, once appear mistake especially line size is too short, cause rework of all stations, affect the production efficiency and time consuming. So in the preparation process line is sure to reasonably determine the wire line size according to the requirements of the drawings, stripping head size. Production line operating instructions, production process tracking card.
Pressing process
Involute after the second producti